VIPER25LN
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPer™ plus |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 24W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | VIPER25 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3.5mA |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 136kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER25LN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .You can get it in AC/DC power converter Tube .It is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Switching frequency reaches 136kHz Hz.As long as the supply voltage (Vcc/Vdd) is within the range of 8.5V~23.5V , the AC/DC converter may be used.In total, there are 7 terminations.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter count up to 7 .Suitable mounting is provided by Through Hole .This AC to DC converter belongs to the VIPer? plus family of manufacturers.The VIPER25 family allows you to search for similar acdc converters.There are 1 outputs to be run.Switching Regulator or Controllers includes the ac to dc conversions.AC to DC converter is set to 1.5A for the output current.It is possible to read the REACH SVHC standard at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 23.5V .It is assumed that a coverter generates 20W as its output power.A voltage of less than 8.5V V can be used with the AC to DC inverter.Input voltage (AC) should be below 265V .
VIPER25LN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 136kHz
With 7 pins
Output Current at 1.5A
VIPER25LN Applications
There are a lot of STMicroelectronics VIPER25LN AC DC Converters applications.
- Switching AC-DC Charger
- Replacements for bulky plug-in transformers
- Digital cameras
- Automotive Clusters
- Humidifier
- Adapter/Charger for Cordless Phones
- LED lights
- SMPS house keeping power supplies
- Rice Cooker
- USB type-c v1.2 chargers with optional VDM