VIPER17LDTR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPer™ plus |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 1W |
| Max Power Dissipation | 12W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VIPER17 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 800V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.8mA |
| Output Current | 420mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~23.5V |
| Output Power | 10W |
| Topology | Flyback |
| Min Input Voltage | 8.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 60kHz |
| Max Input Voltage | 23.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 80 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 800V |
| Voltage - Start Up | 14V |
| Height | 1.47mm |
| Length | 10mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VIPER17LDTR Overview
The ac to dc converter is embedded in 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) case is available for the ac dc converter.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.60kHz is the switching frequency.It can be used within the range of 8.5V~23.5V supply voltage (Vcc/Vdd).In total, it has 16 terminations.Approximately 16 pins are present on the ac/dc converter.The pins of the ac-dc converter count up to 16 .Surface Mount is the recommended mounting method for the ac dc converters.It is a member of VIPer? plus manufacturer family.The VIPER17 family can be used to search for similar acdc converters.There are 1 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .It has been set to 420mA for the output current.There is 800V output voltage from this AC/DC converter.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 23.5V voltage.There is 10W output power generated by a coverter.It is possible to operate the AC to DC inverter with an input voltage that is less than 8.5V V.
VIPER17LDTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 60kHz
With 16 pins
Output Current at 420mA
VIPER17LDTR Applications
There are a lot of STMicroelectronics VIPER17LDTR AC DC Converters applications.
- AC?DC USB chargers for Cameras
- Power adapters for monitors
- AC/DC Adaptors/Chargers for E-books
- Home Appliance Applications
- Smartphones
- Automotive Clusters
- Air conditioners
- Utility meters
- AC-DC Output Power Conversion Applications
- Laptops