VIPER100ASP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | 25°C |
| Power (Watts) | 100W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 82W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 200kHz |
| Base Part Number | VIPER100 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 8V~15V |
| Max Supply Current | 16mA |
| Control Features | EN, Frequency Control, Soft Start |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 12 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER100ASP-E Overview
This ac to dc converter is embedded in package PowerSO-10 Exposed Bottom Pad .The AC/DC power converter Tube is available for this product.It is mounted in the way of Surface Mount .In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.There is Up to 200kHz switching frequency.It can be used within the range of 8V~15V supply voltage (Vcc/Vdd).In total, it has 10 terminations.There are 10 pins on this ac/dc converter.The pins of the ac-dc converter count up to 10 .There are no problem mounting the ac dc converters by Surface Mount .It is a member of VIPER? manufacturer family.A similar acdc converter can be searched by using the VIPER100 family.Running 1 outputs is available.The ac to dc conversions are included in Switching Regulator or Controllers .3A is set as the output current.There is 700V output voltage from this AC/DC converter.AC to DC converter is able to reach high efficiency when its frequency is 200kHz .There is a maximum supply current of 16mA that AC to DC converter can handle.A maximum value 125°C ensures that the AC to DC power converter runs steadily.Minimum working temperature of this isolated switch must not be lower than 25°C .
VIPER100ASP-E Features
Packaged with PowerSO-10 Exposed Bottom Pad
Switching Frequency at Up to 200kHz
With 10 pins
Output Current at 3A
VIPER100ASP-E Applications
There are a lot of STMicroelectronics VIPER100ASP-E AC DC Converters applications.
- Adaptors for DSCs
- Automotive Telematics
- Wall switches
- ZigBee
- Records
- LED lights
- Z-Wave
- ATX/BTX Auxiliary Power
- Industrial controls
- AC?DC USB chargers for Cameras