UCC5680PW24
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 9 |
| Type | SCSI, LVD |
| Resistance | 105Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC5680 |
| Pin Count | 24 |
| Power Supplies | 3/5V |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 35mA |
| Differential Output | YES |
| Number of Drivers | 1 |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 105Ohm |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC5680PW24 Overview
The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. Because of its low package cost, the 24-TSSOP (0.173, 4.40mm Width) is widely used in the electronic industry. Tube's materials are followed in the packaging. Using Surface Mount, you mount it on a PCB. There should be no more than 0°C~70°C operating temperature. Standard applications can be carried out with this SCSI, LVD-qualified material. The 2.7V~5.25V Supply Voltage ensures normal operation. Using Base Part Number UCC5680 will allow you to find related parts. Specific uses are provided with 24 pins. These lines are devoted exclusively to the transmission of signals or intelligence and are either public or private. This device has a Surface Mount-mount. Subcategory Bus Terminators is where it belongs. Contacts with 24 pins are used in computers and other communications devices. Operating 3/5V Power Supplies is required. Here, 105Ohm is the resistance of the electrical device. As the device is able to operate on 35mA supply voltages, it can be used in a wide range of applications. It is possible to have up to 1 eligible receivers/drivers on the field simultaneously with this electronic part.
UCC5680PW24 Features
9 terminations
Tube package
UCC5680 family
24 pin count
9 signal lines
24 pins
3/5V power supplies
UCC5680PW24 Applications
There are a lot of Texas Instruments UCC5680PW24 Signal Terminators applications.
- mainframes
- Compact disk drives
- SCSI cable
- Remote input module
- IEC61131-2 type 1, 2 and 3
- Optical disk drives
- PCI Cards
- Network attached storage (NAS)
- tape drives
- Disk array (RAID)