UCC3895NG4
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC3895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
UCC3895NG4 Overview
This ac to dc converter is included in the package 20-DIP (0.300, 7.62mm) .You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .A range of 10V~16.5V supply voltages (Vcc/Vdd) can be used.As a result, it has a total of 20 terminations.It contains 20 pins.Up to 20 pins are present on the ac-dc converter.It is suitable for mounting by Through Hole .A similar acdc converter can be searched by using the UCC3895 family.The number of outputs to run is 4 .The following ac to dc conversions are contained in Switching Regulator or Controllers .10mA is set as the output current.There is 250mV output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 16.5V .As a result of using this ACDC converter, ALSO OPERATES IN CURRENT MODE can also be detected.In all situations, this AC to DC converter should be set to 12V .
UCC3895NG4 Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 10mA
UCC3895NG4 Applications
There are a lot of Texas Instruments UCC3895NG4 AC DC Converters applications.
- Wall switches
- Cellular phone chargers
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Appliance Power Supplies
- Standby and Auxiliary Power Supplies
- AC/DC Adaptors/Chargers for PDAs
- Standby Power for General Off-Line Applications
- Consumer electronics
- AC-DC Output Power Conversion Applications
- Vacuum Cleaner