UCC3819ADG4
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 250kHz |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 17V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1.2A |
| Frequency - Switching | 115kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | BOOST |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC3819ADG4 Overview
Currently, it is available as a SOIC package.POWER FACTOR CONTROLLER is another IC type on the part.Several 16 terminals are present on the gadget.A component's pin number remains 16.There is a frequency 115kHz associated with switching.There are 16 pins in this board, which make up its sum.It's like a subclass of Switching Regulator or Controllers.With a frequency of 250kHz, it can continue to operate accurately.At most, it works with 1.2A output currentIt is powered by a 12V-volt supply at all times.There should be a limit on ISUP, the maximum supply current, so that it does not exceed 6mA.The device's supplies are 12V.As soon as it is turned on, it should be warmer than 0°C.It is at this point that the maximum operating temperature is 70°C.Voltages higher than 17V are required for it to work.A voltage of 10.8V volts is the only supply voltage it can work with.
UCC3819ADG4 Features
UCC3819ADG4 Applications
There are a lot of Texas Instruments UCC3819ADG4 PFC PMICs applications.
- Engine management
- Post DC-DC regulation
- Noise filters
- Wired/Wireless audio systems
- Smart manufacturing
- VCO (Voltage-Controlled Oscillator)
- Automotive applications
- eBike
- Wireless charge devices
- Home electric appliance