UCC2894PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2894 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 11.1V |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Quiescent Current | 2mA |
| Control Features | Soft Start, Sync |
| Topology | Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 19ns |
| Supply Current-Max (Isup) | 3mA |
| Fall Time (Typ) | 14 ns |
| Nominal Input Voltage | 110V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 73 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.7V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2894PW Overview
This ac to dc converter is embedded in package 16-TSSOP (0.173, 4.40mm Width) .You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~105°C TJ °C.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Vcc/Vdd can be used within the range of 8.5V~16V supply voltage.There are a total of 16 terminations.In this ac/dc converter, there are 16 pins.There are a total of 16 pins on the ac-dc converter.A similar acdc converter can be searched by using the UCC2894 family.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .Currently, the output current is set to 2A .As a result, its output voltage is 11.1V .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .REACH SVHC standard can be found at No SVHC .When the supply voltage is 12V , the interface IC may conduct.This AC to DC converter should always be set to 12V .The AC to DC power supply consumes quiescent current at 2mA .
UCC2894PW Features
Packaged with 16-TSSOP (0.173, 4.40mm Width)
With 16 pins
Output Current at 2A
Operating Supply Voltage at the range of 12V
UCC2894PW Applications
There are a lot of Texas Instruments UCC2894PW AC DC Converters applications.
- Laptops
- LED Driver
- Adapters
- Standby and Auxiliary Power Supplies
- Standby Power Supplies
- Standby power supplies for IR
- Standby power supplies for VCR
- Shaver Charger
- Wireless System
- Utility meters