UCC28880D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 254.011727mg |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 7 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC28880 |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Input Voltage-Nom | 30V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 72μA |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~5V |
| Quiescent Current | 60μA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 30V |
| Frequency - Switching | 62kHz |
| Max Input Voltage | 700V |
| Control Technique | PULSE WIDTH MODULATION |
| Total Power Output-Max | 3W |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 3.9V |
| Min Input Voltage (AC) | 30V |
| Max Input Voltage (AC) | 700V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28880D Overview
A ac to dc converter of the package 8-SOIC (0.154, 3.90mm Width), 7 Leads contains the ac to dc converter.You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~105°C TA °C in order to achieve its full performance.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.In this AC to DC transformer, the switching frequency is 62kHz .Vcc/Vdd can be used within the range of 3.6V~5V supply voltage.There are a total of 7 terminations.There are 7 pins on the ac/dc converter.It is suitable for mounting by Surface Mount .Similar acdc converters can be found using the UCC28880 family.There are 1 outputs to be processed.Currently, the output current is set to 100mA .There is 3.3V voltage output from it.SVHC for REACH can be found in the standard No SVHC .The AC to DC converter input voltage can be powered under 700V .The AC to DC inverter can be used with an input voltage of less than 30V V.The AC to DC power converter's input voltage (AC) should be below 700V .When 60μA is reached, AC to DC converter consumes quiescent current.
UCC28880D Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 62kHz
With 7 pins
Output Current at 100mA
UCC28880D Applications
There are a lot of Texas Instruments UCC28880D AC DC Converters applications.
- Appliances
- SMPS house keeping power supplies
- Records
- Appliance Power Supplies
- Air conditioners
- AC?DC USB chargers for Cameras
- Automotive Telematics
- Shaver Charger
- Replaces linear transformers
- Set -Top Box (STB) Power Supply