UCC28610D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 65W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 130kHz |
| Base Part Number | UCC28610 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 3mA |
| Power Dissipation | 606mW |
| Output Current | 3.6A |
| Voltage - Supply (Vcc/Vdd) | 8V~25V |
| Output Power | 65W |
| Topology | Flyback |
| Min Input Voltage | 9V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 30kHz~133kHz |
| Max Input Voltage | 20V |
| Dropout Voltage | 2V |
| Nominal Input Voltage | 20V |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 2 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 10.2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
UCC28610D Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.The switching frequency reaches 30kHz~133kHz .Within the range of 8V~25V supply voltage (Vcc/Vdd), it can be used.A total of 8 terminations have been recorded.There are 8 pins on the ac/dc converter.The UCC28610 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .We are setting the output current to 3.6A .Its output voltage is12V .AC to DC converter reaches high efficiency when operated at a frequency of 130kHz .It is possible to read the REACH SVHC standard at: No SVHC .Under 20V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power is 65W .The AC to DC inverter can be used with an input voltage of less than 9V V.Keep in mind that this AC to DC converter should always be set to 12V .In total, there are 1 channels.There is a Adjustable output configured.
UCC28610D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at 30kHz~133kHz
With 8 pins
Output Current at 3.6A
With 1 channels on it
Output Type : Adjustable
UCC28610D Applications
There are a lot of Texas Instruments UCC28610D AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- USB-PD 2.0
- Battery Chargers
- Battery chargers for cordless
- Adapter/Charger for Cordless Phones
- AC?DC USB chargers for Cell Phones
- Replaces linear transformers
- Chargers for cell/cordless phones
- Vacuum Cleaner
- Laptops