UCC28220QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | UCC28220 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100A |
| Voltage - Supply (Vcc/Vdd) | 8V~14.5V |
| Control Features | Ramp, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 10ns |
| Supply Current-Max (Isup) | 6mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 2MHz |
| Output Voltage-Max | 3.45V |
| Max Duty Cycle | 90 % |
| Duty Cycle (Max) | 75% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28220QPWRQ1 Overview
With its 16-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 8V~14.5V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz~2MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Ramp, Soft Start is included in the dcdc regulator. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 16 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. A search for "UCC28220" will reveal other relevant dc to dc converter ics. In total, switching converter has 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. An input voltage of 8V is the minimum required for the dc dc voltage regulator. DC regulator outputs 3.3V voltage based on test statistics. In most cases, the dc dc regulator's output current is 100A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 2MHz on this dc regulators. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. There must be a voltage supply of 12V volts. It is not recommended to supply more current to the controller than 6mA. 3.45V is the dc controller's maximum voltage output.
UCC28220QPWRQ1 Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
UCC28220QPWRQ1 Applications
There are a lot of Texas Instruments UCC28220QPWRQ1 DC to DC converter applications.
- Post equipment
- Hydraulic presses
- Geothermal power
- Electric water heaters
- Emergency lighting monitoring equipment
- Series voltage regulation circuits
- Computer application technology
- Product burn-in
- Flaw detection equipment
- SMT equipment