UCC2813PW-2
| Parameters | |
|---|---|
| Input Voltage (Min) | 9.3V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Fall Time (Typ) | 44 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 12.5V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC2813 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 500μA |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
UCC2813PW-2 Overview
It is embedded in package 8-TSSOP (0.173, 4.40mm Width) .The AC/DC power converter type is Tube .Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -55°C~150°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Within the range of 8.3V~12V supply voltage (Vcc/Vdd), it can be used.In total, there are 8 terminations.There are 8 pins on the ac/dc converter.There are 8 pins in the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .If you select the UCC2813 family, you will be able to search similar acdc converters.There are 1 outputs to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .The output current is set to 200mA .In this AC to DC transformer, the output voltage is 1V .A high efficiency can be achieved by operating at a frequency of 1MHz .You should always set this AC to DC converter to 10V .
UCC2813PW-2 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 200mA
UCC2813PW-2 Applications
There are a lot of Texas Instruments UCC2813PW-2 AC DC Converters applications.
- Battery chargers for cordless
- AC-DC Output Power Conversion Applications
- Open Frame Switching Power Supply
- Standby power supplies for VCR
- Wall switches
- Chargers for cell/cordless phones
- Universal input AC/DC adapters (15W - 45W)
- Home appliances
- Remotely-controlled appliances
- Standby Power Supply