UCC2810DW
| Parameters | |
|---|---|
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Base Part Number | UCC2810 |
| Pin Count | 16 |
| Output Voltage | 1.2V |
| Input Voltage-Nom | 10V |
| Number of Channels | 2 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~11V |
| Quiescent Current | 8.5mA |
| Control Features | Frequency Control, Sync |
| Input Voltage (Min) | 9.5V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 11V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Fall Time (Typ) | 30 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.3V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
UCC2810DW Overview
This ac to dc converter is included in the package 16-SOIC (0.295, 7.50mm Width) .The ac dc converter is available in Tube case.Surface Mount is mounted in the way of this AC/DC converter.For the ac dc converter to perform at its best, it should be operated at a temperature of 0°C~70°C TA °C.This AC DC converter employs DUAL SWITCHING CONTROLLER analog IC type.A range of 8.3V~11V supply voltages (Vcc/Vdd) can be used.In total, it has 16 terminations.Approximately 16 pins are present on the ac/dc converter.The ac-dc converter has 16 pins.Surface Mount is a suitable mounting point for the ac dc converters.The UCC2810 family allows you to search for similar acdc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .It has been set to 200mA for the output current.The output voltage of the AC/DC converter is 1.2V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .Using a unique technique, a voltage with a maximum value of 11V can be ensured.This is the standard of REACH SVHC : No SVHC .Currently, there are 2 channels available.When set to 8.5mA , AC to DC converter consumes quiescent current.
UCC2810DW Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
With 16 pins
Output Current at 200mA
With 2 channels on it
UCC2810DW Applications
There are a lot of Texas Instruments UCC2810DW AC DC Converters applications.
- Z-Wave
- Set -Top Box (STB) Power Supply
- Replacements for bulky plug-in transformers
- Power adapters for monitors
- AC/DC Adaptors/Chargers for Cell Phones
- PDAs
- Utility meters
- IoT Applications
- Adapter/Charger for Cordless Phones
- Adapter for ADSL