UCC2808APWTR-1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | UCC2808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | No |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2808APWTR-1 Overview
The ac to dc converter is embedded in 8-TSSOP (0.173, 4.40mm Width) package.In Tape & Reel (TR) AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.A range of 8.3V~15V supply voltages (Vcc/Vdd) can be used.There are a total of 8 terminations in it.It contains 8 pins.There are 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .You can search similar acdc converters based on UCC2808 family.AC to DC converter is necessary to run 2 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 100mA .Its output voltage is500mV .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.Using a unique technique, it is possible to ensure an input voltage with a maximum value of 13V .
UCC2808APWTR-1 Features
Packaged with 8-TSSOP (0.173, 4.40mm Width)
With 8 pins
Output Current at 100mA
UCC2808APWTR-1 Applications
There are a lot of Texas Instruments UCC2808APWTR-1 AC DC Converters applications.
- Wall switches
- Consumer electronics
- WiFi Wireless
- Set-top boxes
- Charger
- Power Adaptors
- Appliances
- IoT Applications
- Networking
- Chargers for cell/cordless phones