UCC2802DTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2802 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 1V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 8.3V~12V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 25mA |
| Fall Time (Typ) | 44 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 99% |
| Voltage - Start Up | 12.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2802DTR Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width) .You can get it in AC/DC power converter Tape & Reel (TR) .This AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~85°C TA degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .At this point, the switching frequency reaches Up to 1MHz .Vcc/Vdd can be used within the range of 8.3V~12V supply voltage.As a result, it has a total of 8 terminations.There are 8 pins on the ac/dc converter.Up to 8 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .Based on the UCC2802 family, you can search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions can be found in Switching Regulator or Controllers .It has been set to 1A for the output current.This AC/DC converter produces a voltage of 1V as its output.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 1MHz .Keep in mind that this AC to DC converter should always be set to 10V .
UCC2802DTR Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
UCC2802DTR Applications
There are a lot of Texas Instruments UCC2802DTR AC DC Converters applications.
- Shaver Charger
- Switching AC-DC Charger
- Industrial controls
- Adapters
- AC/DC Adaptors/Chargers for Cordless Phone
- Set -Top Box (STB) Power Supply
- Digital cameras
- Standby Power for General Off-Line Applications
- Charger
- Tablets