UCC27536DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 10V~32V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | UCC27536 |
| Number of Outputs | 1 |
| Max Output Current | 5A |
| Operating Supply Voltage | 18V |
| Nominal Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 20 ns |
| Input Type | Inverting |
| Turn On Delay Time | 26 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 15ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 26 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Interface IC Type | HALF BRIDGE BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.026 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.2V 2.2V |
| Turn Off Time | 0.026 µs |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27536DBVT Overview
A higher level of flexibility is provided by its SC-74A, SOT-753 package.The packaging method is indicated by Tape & Reel (TR).Surface Mount is mounted in the way of the device.In the absence of a 10V~32V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device allows temperatures in the range of -40°C~140°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Mosfet driver is based on 5 terminations.Many related parts can be found under its base part number UCC27536.Mounting the device requires Surface Mount.During design, it is configured with 5 pins.Mosfet driver is designed specifically to run on 18V volts of power.The interface IC of the device is HALF BRIDGE BASED IGBT/MOSFET DRIVER.There is a maximum output current of 5A that can be achieved.Its subcategory of Peripheral Drivers contains various useful electronic components.The basis of this model has 1 outputs integrated.5A is the maximum output current supported by the device.The operating supply voltage should be set at 18V.
UCC27536DBVT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
5 pins
UCC27536DBVT Applications
There are a lot of Texas Instruments UCC27536DBVT gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Motor Controls
- Industrial Power Supplies
- High-speed communications
- LCD/LCoS/DLP portable and embedded pico projectors
- RGB applications
- Solar inverters
- Active filtering
- Broadcast equipment
- Solar power supplies