UCC27536DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Voltage - Supply | 10V~32V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | UCC27536 |
| Number of Outputs | 1 |
| Max Output Current | 2.5A |
| Output Current | 5A |
| Input Type | Inverting |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 15ns |
| Fall Time (Typ) | 8 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 15ns 10ns |
| Interface IC Type | HALF BRIDGE BASED IGBT/MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.026 µs |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.2V 2.2V |
| Turn Off Time | 0.026 µs |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27536DBVR Overview
Gate drivers provides greater flexibilGate driversy to use the SC-74A, SOT-753 package.A package of Tape & Reel (TR) has been used.Surface Mount is the way in which it is mounted.WGate driversh a 10V~32V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel MOSFET design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.Inverting is the input type used in this program.Its configuration is based on a total of 5 terminations.The base part number UCC27536 refers to a number of related parts.Surface Mount is the way it takes to mount the device.At the time of design, it is configured with 5 pins.With a supply voltage of 18V, it is designed to operate.Mosfet driver employs an interface chip called HALF BRIDGE BASED IGBT/MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 2.5A.There are several useful electronic components within its subcategory Peripheral Drivers.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.This device is capable of delivering 5A current.
UCC27536DBVR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
5 pins
UCC27536DBVR Applications
There are a lot of Texas Instruments UCC27536DBVR gate drivers applications.
- Refrigerator
- DC-DC Converters
- Smart Phones
- Isolated switch mode power supplies (SMPS)
- Portable computers
- Isolated Supplies for controller area network (CAN),
- Topologies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- General Purpose 3-Phase Inverter
- Commercial and agricultural vehicles (CAV)