UCC27524DGN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC27524 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 5A |
| Operating Supply Voltage | 12V |
| Operating Supply Current | 5A |
| Output Current | 5A |
| Propagation Delay | 23 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 23 ns |
| Rise Time | 18ns |
| Fall Time (Typ) | 10 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 7ns 6ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 5A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 5A 5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2.3V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27524DGN Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A packaging method of Tube is used.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.Temperature range -40°C~140°C TJ is allowed for this device.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number UCC27524.Mounting the device requires Surface Mount.Devices have 8 pins available.In addition, it is specifically designed to operate with a supply voltage of 12V.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 8 component pins is available.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device supports a current output of 5A at the output.In order to operate properly, the operating supply voltage should be set to 12V.During operation, a voltage of 5A is applied to the power supply.
UCC27524DGN Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
UCC27524DGN Applications
There are a lot of Texas Instruments UCC27524DGN gate drivers applications.
- High frequency line drivers
- Multicolor LED/laser displays
- AC-DC Inverters
- Pulse transformer drivers
- serial peripheral interface (SPI), I2C
- LCD/LCoS/DLP portable and embedded pico projectors
- General Purpose 3-Phase Inverter
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)
- Motor Drives