UCC27425P
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 350mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27425 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 330mV |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 350mW |
| Output Current | 4A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27425P Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube is the packaging method.Through Hole is mounted in the way of the device.In the absence of a power supply voltage of 4V~15V V, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.The input type is Inverting, Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.The base part number UCC27425 refers to a number of related parts.Mosfet driver is mounted using Through Hole.When designing, the device is configured with 8 pins.Mosfet driver is designed specifically to run on 14V volts of power.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be limited to 4A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.The basis of the model has 2 outputs integrated.The output current can be set to 4A.350mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 1.6mA.Based on its power supplies of 4.5/15V, it solves the problem of power supply failure for a variety of applications.When this voltage is produced, it is marked as 330mV.
UCC27425P Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 350mW
UCC27425P Applications
There are a lot of Texas Instruments UCC27425P gate drivers applications.
- Pulse transformer drivers
- Telecom switch mode power supplies
- Commercial air-conditioning (CAC)
- A/D drivers
- Industrial Power Supplies
- Isolated Supplies for Motor Control
- High current laser/LED systems
- Isolated Supplies for controller area network (CAN),
- PCMCIA applications
- Refrigerator