UCC27201AQDDARQ1
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCC27201 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Supply Current-Max | 5.5mA |
| Input Type | Non-Inverting |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.05 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.05 µs |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Output Current Flow Direction | SINK |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27201AQDDARQ1 Overview
A higher degree of flexibility is achieved by adopting its 8-PowerSOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is based on 2 drivers.Surface Mount is mounted in the way.Using a 8V~17V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type is Non-Inverting.It's configured with 8 terminations.The base part number UCC27201 refers to a number of related parts.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is a maximum output current of 3A.On the board, there are 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 120V.Gate drivers of this type are included in the Automotive, AEC-Q100 series.If the supply current exceeds 5.5mA, the unit cannot operate.
UCC27201AQDDARQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Operating with the supply voltage of Automotive, AEC-Q100
UCC27201AQDDARQ1 Applications
There are a lot of Texas Instruments UCC27201AQDDARQ1 gate drivers applications.
- Industrial Modules
- Refrigerator
- 3-Phase Motor Inverter Driver
- PCMCIA applications
- Welding
- Power factor correction (PFC) circuits
- serial peripheral interface (SPI), I2C
- High-voltage isolated DC-DC converters
- DC-DC Converters
- Active Clamp Flyback or Forward and Synchronous Rectifier