UCC27200QDDARQ1
| Parameters | |
|---|---|
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1GHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
UCC27200QDDARQ1 Overview
A higher level of flexibility is provided by its 8-PowerSOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 8V~17V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~140°C TJ.Non-Inverting is used as the input type.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number UCC27200.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.In order to operate, a voltage of 12V has to be applied.In the maximum case, the output current can be 3A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.A boot strap voltage of 120V is the maximum possible high-side voltage.Based on its basis, it integrates 2 outputs.3A is the maximum output current supported by the device.Its maximum power dissipation of 2.7W shows its power loss capacity without overheating.As a precaution, make sure the supply current is kept at 4mA.The operating supply voltage should be set at 12V.Gate drivers in this series are included in the Automotive, AEC-Q100 series.By using the frequency 1GHz, we can increase efficiency.
UCC27200QDDARQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
Operating with the supply voltage of Automotive, AEC-Q100
UCC27200QDDARQ1 Applications
There are a lot of Texas Instruments UCC27200QDDARQ1 gate drivers applications.
- Multicolor LED/laser displays
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- Motor Drives
- Solar inverters
- Smart Phones
- High power buffers
- DC/DC converters
- Industrial Modules