UCC27200DDA
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 2.7W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2.7W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200DDA Overview
For greater flexibility, the 8-PowerSOIC (0.154, 3.90mm Width) package is adopted.Tube represents the package.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 8V~17V supply voltage.Gate type N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~140°C TJ.Input type of Non-Inverting is used.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts are available for its base part number UCC27200.The device is mounted with Surface Mount.When the device is designed, it has 8 pins.The device is specifically designed to operate at 12V volts.Mosfet driver is possible to achieve a maximum output current of 3A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Components with 8 pins are available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 120V.The basis of the model has 2 outputs integrated.The output current supported by the device is 3A.Considering its maximum power dissipation, 2.7W shows its maximum capacity to transfer and conduct power loss without overheating.To maintain higher stability, the supply current should always be 4mA.In order to operate properly, the operating supply voltage should be set to 12V.By using the frequency 1MHz, we can increase efficiency.
UCC27200DDA Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
UCC27200DDA Applications
There are a lot of Texas Instruments UCC27200DDA gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- Active filtering
- Commercial air-conditioning (CAC)
- High frequency line drivers
- Solar inverters
- Portable Media Players
- High power buffers
- AC-DC Inverters
- LCD/LCoS/DLP portable and embedded pico projectors