UCC27200D
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.3W |
| Technology | BICMOS |
| Voltage - Supply | 8V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC27200 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Operating Supply Voltage | 12V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1.3W |
| Output Current | 3A |
| Max Supply Current | 4mA |
| Propagation Delay | 20 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 7 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 8ns 7ns |
| Driver Number of Bits | 2 |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| Logic Voltage - VIL, VIH | 3V 8V |
| Built-in Protections | UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 120V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27200D Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A package of Tube has been used.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 8V~17V supply voltage, it can demonstrate its superiority.A gate type of N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type for this program is Non-Inverting.8 terminations constitute its foundation.There are various parts that can be found under its base part number UCC27200.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Specification is for 12V supply voltage operation.There is a maximum output current of 3A.There are several useful electronic components in this subcategory of MOSFET Drivers.The board contains 8 pins for component connections.There can be a voltage up to 120V on the high-side (Bootstrap).The basis of the model has 2 outputs integrated.This device is capable of delivering 3A current.According to its maximum power dissipation, 1.3W is capable of conducting and transferring a large amount of power without overheating.To maintain higher stability, the supply current should always be 4mA.As a rule of thumb, the operating supply voltage should be set to 12V.By using the frequency 1MHz, we can increase efficiency.
UCC27200D Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 1.3W
UCC27200D Applications
There are a lot of Texas Instruments UCC27200D gate drivers applications.
- Industrial Modules
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- Topologies
- General Purpose 3-Phase Inverter
- Broadcast equipment
- Industrial Motor Inverter - Power Tools, Robotics
- Multicolor LED/laser displays
- High current laser/LED systems
- Motor controllers