UCC2585MG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | UCC2585 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 6.3V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 485kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2585MG4 Overview
With a 16-SSOP (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 3V~5.5V and has a 3V~5.5V supply voltage. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 500kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 3.3V. In addition to "UCC2585", there are other relevant dc to dc converter ics you can find. There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 3V. Statistically, the DC regulator outputs 900mV voltage. It should be fully noted that the dc to dc regulator only accepts 6.3V input voltage at most. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. The max frequency of the pmic can reach 485kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 5V. Whenever the current value is 1A, switching converter outputs the highest possible value.
UCC2585MG4 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
UCC2585MG4 Applications
There are a lot of Texas Instruments UCC2585MG4 DC to DC converter applications.
- Handheld GPS
- Energy management systems
- Production lines
- Hydro power
- Surface processing equipment
- Window air conditioners
- Various CNC machine tools
- Domestic water pumps
- Gear/thread machining machines
- Hydraulic presses