UCC2583NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Secondary-Side Controller |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 8.9V~14V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | UCC2583 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 150mA |
| Current - Supply | 3mA |
| Input Voltage (Min) | 8.9V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 95 % |
| Switching Frequency | 500kHz |
| Duty Cycle | 100 % |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC2583NG4 Overview
In Tube, it is packaged. As a space-saving measure, it is included in the 14-DIP (0.300, 7.62mm) package. Through Hole specifies how it should be mounted. During function, the temperature should not exceed -40°C~85°C. This system has exceptional performance, which makes it a perfect choice for Secondary-Side Controller. Because of the 8.9V~14V supply voltage, high efficiency is possible. It uses an analog integrated circuit SWITCHING CONTROLLER. There are a total of 14 terminations. In total, it has 14 pins. Using UCC2583 as its base part number, similar components can be found. 3mA current is supplied. A device of this type belongs to Switching Regulator or Controllers. The chip is designed to use 14 pins. The device is mounted in accordance with the method of Through Hole. A nominal input voltage of 12V is designed to meet its functioning requirements. 600mV is the constant output voltage. This device is equipped with 1 outputs. Input voltage must be at least 8.9V. This case has a 150mA output current.
UCC2583NG4 Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Switching Regulator or Controllers subcategory
Input voltage of 12V
UCC2583NG4 Applications
There are a lot of Texas Instruments UCC2583NG4 Power Supply Control ICs applications.
- Remote system
- Server
- Screen lift
- Pocket PC
- User-available push-button control panel
- Multimedia teaching
- Film engineering
- Intrinsically safe equipment
- Amplifier
- Light