UC3865N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.05001g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 500kHz |
| Base Part Number | UC3865 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 10.5V~22V |
| Control Features | Soft Start |
| Input Voltage (Min) | 11.5V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~1MHz |
| Control Technique | RESONANT CONTROL |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 50 % |
| Duty Cycle | 100 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 16.5V |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3865N Overview
An embedded ac to dc converter is included in 16-DIP (0.300, 7.62mm) package.There is a AC/DC power converter of Tube available.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of 0°C~70°C TA °C in order to achieve its full performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.There is 10kHz~1MHz switching frequency.As long as the supply voltage (Vcc/Vdd) is within the range of 10.5V~22V , the AC/DC converter may be used.There are a total of 16 terminations in it.In this ac/dc converter, there are 16 pins.A total of 16 pins are present on the ac-dc converter.Based on the UC3865 family, you can search for similar acdc converters.The number of outputs to run is 2 .AC to DC converter is included in Switching Regulator or Controllers .Current output is set to 500mA .There is 1.7V voltage output from it.A high efficiency is achieved when operating at a frequency of 500kHz .It is possible to read the REACH SVHC standard at: No SVHC .
UC3865N Features
Packaged with 16-DIP (0.300, 7.62mm)
Switching Frequency at 10kHz~1MHz
With 16 pins
Output Current at 500mA
UC3865N Applications
There are a lot of Texas Instruments UC3865N AC DC Converters applications.
- Smartphones
- Shaver Charger
- Adapters for Handheld Electronics
- AC-DC Output Power Conversion Applications
- Adapter/Charger for Cell
- Industrial controls
- AC?DC USB chargers for Tablets
- Utility meters
- Standby Power for General Off-Line Applications
- Handheld/Battery-Powered Systems