UC3842AM
| Parameters | |
|---|---|
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Quiescent Current | 11mA |
| Control Features | Frequency Control |
| Topology | Boost, Buck, Flyback, Forward |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | IN PRODUCTION (Last Updated: 1 month ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 500kHz |
| Base Part Number | UC*84 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
UC3842AM Overview
It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). dc controls with 10V~30V voltage are supplied and operated. Work well in dc switchers with a 0°C~70°C TA. The switching controller can be switched at Up to 500kHz. It is suitable for general dc dc regulator when it is set to Through Hole. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 15V. UC*84 can be searched for other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The dc to dc regulator is limited to 30V input voltage. It is set to 100 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Through Hole makes it suitable. Switching controllers operate at 500kHz frequencies. 1A is the largest value switching converter outputs. DC switching uses 11mA when it is dormant.
UC3842AM Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz
UC3842AM Applications
There are a lot of Microchip Technology UC3842AM DC to DC converter applications.
- Series voltage regulation circuits
- Flexible manufacturing cells
- Bending machines
- Production lines
- Hydro power
- Power supplies of electronic gadgets
- Remotely powered electric motors
- Mobile phones
- Photovoltaic power
- Television equipment