UC37132N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC37132 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Output Configuration | High Side or Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC37132N Overview
It is packaged in the form of a Tube.It is included with the 14-DIP (0.300, 7.62mm) package as well.Mounting type Through Hole is selected for the LED driving board.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to 0°C~70°C TA.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of Bipolar volts can be achieved by this LED driver.It is part of the UC37132 family of LED drivers.As a result, there are 14 terminations.For operation, 14 pins are used.There are 1 functions of the LED driver.The maximum output current drops to 700mA in order to meet the operation criteria.Using a voltage of 25V allows for high efficiency.14 pins are equipped with it.This case has the output current set to 300mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part has a power supply of 25V.It is recommended that the supply voltage be set at 65V in order to achieve maximum efficiency.The maximum input voltage is 65V volts.There is a minimum input voltage of 8V volts.It operates at a maximum current of 2.5mA.
UC37132N Features
Supplied from 25V
UC37132N Applications
There are a lot of Texas Instruments UC37132N Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Hard Disk Drives
- Solid-State Drives
- USB Ports/Hubs
- Hot Swaps
- Smartphone and PDA
- Set-Top Boxes
- Hot-Swap Systems
- Portable Devices