UC2876NG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC2876 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 15.25V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
UC2876NG4 Overview
An embedded ac to dc converter is included in 20-DIP (0.300, 7.62mm) package.There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.The voltage range of the supply can be set to 9.5V~20V (Vcc/Vdd).A total of 20 terminations have been recorded.The ac/dc converter has a total of 20 pins.A total of 20 pins are present on the ac-dc converter.If you select the UC2876 family, you will be able to search for similar acdc converters.A total of 4 outputs are to be processed.The following ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 500mA .As a result, its output voltage is 1.7V .As long as AC to DC converter is operated at frequency 1MHz ,it is capable of attaining high efficiency.It is also possible to detect CAN ALSO BE CONFIGURED IN CURRENT MODE when utilizing this ACDC converter.
UC2876NG4 Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 500mA
UC2876NG4 Applications
There are a lot of Texas Instruments UC2876NG4 AC DC Converters applications.
- Switching AC-DC Adapter
- Replacements for bulky plug-in transformers
- Standby Power Supplies
- USB type-c v1.2 chargers with optional VDM
- IoT Applications
- Portable audio
- Tablets
- Utility meters
- Battery chargers for media tablets
- Linear Adapter Replacements