UC2875DWPTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 30mA |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2875DWPTR Overview
This ac to dc converter is embedded in package 28-SOIC (0.295, 7.50mm Width) .The AC/DC power converter is available in Tape & Reel (TR) .It is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Within the range of 9.5V~20V supply voltage (Vcc/Vdd), it can be used.It has a total of 28 terminations.The ac/dc converter has a total of 28 pins.There are a total of 28 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .The UC2875 family can be used to search for similar acdc converters.There are 4 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .Current output is set to 500mA .This AC/DC converter produces a voltage of 1.7V as its output.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .Also, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE can be found using this ACDC converter.Keep in mind that this AC to DC converter should always be set to 12V .
UC2875DWPTR Features
Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA
UC2875DWPTR Applications
There are a lot of Texas Instruments UC2875DWPTR AC DC Converters applications.
- Industrial controls
- Small off-line low voltage power supplies
- AC?DC USB chargers for Tablets
- AC--DC Adapter
- Battery chargers for cellular phones
- Power adapters for network devices
- Standby power supplies for VCR
- Portable audio
- Wireless System
- Low power ac?dc Adapters for Chargers