UC2856N
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2856 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 13.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 47% |
| Output Phases | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2856N Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. 7V~40V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. A switching controller such as this can switch at a value of 200kHz . The Through Hole makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC2856". In total, switching converter has 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. A 13.1V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. The switching controller works at a frequency of 1MHz. 40V is the nominal working voltage. The supply voltage should be 15V.
UC2856N Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UC2856N Applications
There are a lot of Texas Instruments UC2856N DC to DC converter applications.
- PSRR circuits
- Wind power
- Hydrogen power
- Sink circuits
- Plate bending machines
- Communication system
- Fire elevators
- Digital precision reference circuits
- Telecommunications equipment
- Computed tomography (CT)