UC2709NG4
| Parameters | |
|---|---|
| Supply Voltage | 20V |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 12mA |
| Power Dissipation | 1W |
| Max Supply Current | 12mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 80ns |
| Fall Time (Typ) | 80 ns |
| Input Characteristics | STANDARD |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| High Side Driver | YES |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| JESD-609 Code | e4 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
UC2709NG4 Overview
A higher level of flexibility is provided by its PDIP package.Configuration is based on 2 drivers.The configuration is based on 8 terminations.Mosfet driver is mounted using Through Hole.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 20V.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.5A that can be achieved.There are several useful electronic components in this subcategory of MOSFET Drivers.The board has 8 component pins.Mosfet gate drivers is permissible to set the operating temperature to 85°C.Mosfet gate drivers is permissible to operate at a temperature of -40°C.As a precaution, make sure the supply current is kept at 12mA.For operation, it requires a voltage of 40V.5V is the minimum voltage required to operate it.The input of this function is characterised by STANDARD.
UC2709NG4 Features
2 drivers
8 pins
UC2709NG4 Applications
There are a lot of Texas Instruments UC2709NG4 gate drivers applications.
- High-voltage isolated DC-DC converters
- Welding
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor controllers
- Motor Drives
- Isolated Supplies for Motor Control
- Active filtering
- Telecom switch mode power supplies
- Portable Navigation Devices
- A/D drivers