UC2525BDWTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC2525 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Dead Time Control, Frequency Control, Ramp, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 35V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2525BDWTR Overview
It comes in a 16-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. For outputs of 2, this dc motor controller is suitable. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 8V~35V and has a 8V~35V supply voltage. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 100Hz~400kHz. Surface Mount makes it suitable for general dc dc regulator. Dead Time Control, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. You can find other relevant dc to dc converter ics by searching "UC2525". 16 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 18V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. A frequency of 450kHz is set for the switching controller. A nominal working status is achieved when the input voltage is set to 35V.
UC2525BDWTR Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Dead Time Control, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2525BDWTR Applications
There are a lot of Texas Instruments UC2525BDWTR DC to DC converter applications.
- Handheld GPS
- Computer monitoring equipment of building
- Printing
- Imported equipment
- Electrical distribution systems
- Lathes
- Planers
- Laboratories
- Pipe bending machines
- Hydro power