UA747CNE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 800mW |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 800nA |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 18V |
| Low-Bias | NO |
| Micropower | NO |
| Min Dual Supply Voltage | 3.5V |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 6mV |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UA747CNE4 Overview
The linear amplifier is packaged in a PDIP case. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 14 terminations in the next few months. Buffer amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 6mV. Using a supply current of 1.7mA , this buffer op amp will be able to operate. Keeping the voltage gain at 106.02dB is the best course of action. This instrumentation amplifier cannot operate below 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of instrumentation amplifier is rated 18V voltage. This electronic part should be conducted with a dual supply voltage of 18V volts for this part.
UA747CNE4 Features
14 Pins
supply voltage of 15V
106.02dB voltage gain
UA747CNE4 Applications
There are a lot of Texas Instruments UA747CNE4 Instrumentational OP Amps applications.
- Portable docking station
- Professional videography
- Car stereo
- Computer workstations
- Exponential operation circuits
- Tablets
- Communication device
- Weak signal detection
- Gaming industry
- Band-stop filter