TSV621ILT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TSV621 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 29μA |
| Nominal Supply Current | 25μA |
| Output Current | 74mA |
| Slew Rate | 0.14V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.5V~5.5V |
| Output Current per Channel | 69mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 420 kHz |
| Unity Gain BW-Nom | 340 kHz |
| Voltage Gain | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 100kHz |
| Power | NO |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.45mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TSV621ILT Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 5 pins. In terms of input offset voltage, operational amplifier rates 4mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 29μA can be used to operate this linear amplifier. The voltage gain should stay at 98dB. Instrumentation amplifier has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
TSV621ILT Features
5 Pins
supply voltage of 1.8V
98dB voltage gain
Output Type: Rail-to-Rail
TSV621ILT Applications
There are a lot of STMicroelectronics TSV621ILT Instrumentational OP Amps applications.
- Proportional operation circuits
- Signal transformation
- Gaming industry
- pH (acidity)
- Home audio systems
- High gain DC amplifier
- Video data acquisition
- Radar
- Power transmission
- Commercial audio systems