TSV524AIPT
| Parameters | |
|---|---|
| Slew Rate | 0.89V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | CMOS |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 1.15MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 109dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 20 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TSV524 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Operating Supply Current | 45μA |
| Nominal Supply Current | 60μA |
| Output Current | 55mA |
TSV524AIPT Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. Buffer amps of this type are called CMOS-types. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. The linear amplifier should be run at 3.3V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 600μV. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 45μA . It is a member of the 109dB's 109dB family. There are a total of 4 channels available on the op amps. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
TSV524AIPT Features
supply voltage of 3.3V
109dB voltage gain
Output Type: Rail-to-Rail
TSV524AIPT Applications
There are a lot of STMicroelectronics TSV524AIPT Instrumentational OP Amps applications.
- Radar
- Laptop
- Car stereo
- E-book readers
- Video amplifiers
- High-frequency data acquisition systems
- Multiplication circuits
- Television broadcasting equipment
- Digital cameras
- Scintillation detectors