TSM973CUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | TSM97x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | with Voltage Reference |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.5V |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6μA |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 67dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.25V |
| Max Input Current | 5nA |
| Input Bias Current | 5nA |
| Current - Quiescent (Max) | 6μA |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Current - Input Bias (Max) | 0.005μA @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 67dB CMRR, 67dB PSRR |
| Current - Output (Typ) | 40mA |
| Propagation Delay (Max) | 12μs |
| RoHS Status | RoHS Compliant |
TSM973CUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, TTL output.We ship the part through Cut Tape (CT) .Electronic comparator can be classified as a with Voltage Reference chip.In total, it contains 2 elements.The recommended mounting type is Surface Mount .A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.In this comparator, the quiescent current is 6μA .There is a Surface Mount for mounting it on a PCB or other board.Input current to the device is limited to 5nA .Keeping the temperature below 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 11V .A minimum supply voltage of 2.5V is allowed for this comparator.The part belongs to the TSM97x series of comparator parts.
TSM973CUA+T Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 6μA
TSM973CUA+T Applications
There are a lot of Touchstone Semiconductor TSM973CUA+T linear comparators applications.
- Limit Comparators
- Motor drives
- Simple Analog-to-Digital Converters (ADCs)
- Set Top Boxes
- Zero-Crossing Detectors
- Industrial
- Point of load regulators
- Building automation
- Consumer Medical Electronics
- Alarm and Monitoring Circuits