TSM972CUA+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | TSM97x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Output Type | CMOS, TTL |
| Number of Elements | 2 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.5V |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 4μA |
| Common Mode Rejection Ratio | 67 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 67dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.25V |
| Max Input Current | 5nA |
| Input Bias Current | 5nA |
| Current - Quiescent (Max) | 4μA |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Current - Input Bias (Max) | 0.005μA @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 67dB CMRR, 67dB PSRR |
| Current - Output (Typ) | 40mA |
| Propagation Delay (Max) | 12μs |
| RoHS Status | RoHS Compliant |
TSM972CUA+T Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a CMOS, TTL output.As a result, it is designed with Cut Tape (CT) package.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There is 4μA current flowing in this comparator.There is a Surface Mount for mounting it on a PCB or other board.There is a maximum current that can be input into the device of 5nA .Temperatures above 70°C are not recommended.Lower temperatures than 0°C are unsuitable for it.A comparator's maximum supply voltage is 11V .This comparator can be supplied with a voltage as low as 2.5V .The part is based on TSM97x .
TSM972CUA+T Features
CMOS, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 4μA
TSM972CUA+T Applications
There are a lot of Touchstone Semiconductor TSM972CUA+T linear comparators applications.
- Mobile Communications
- Battery-Powered Electronics
- Zero-Crossing Detectors
- Automatic Test Equipment
- Threshold Detectors
- Metering Systems
- System control and monitoring
- Mobile Phones and Tablets
- General-Purpose, Low-Voltage Applications
- DC/DC and AC/DC power supplies