TSM934ESE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | TSM93x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | with Voltage Reference |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Max Supply Voltage | 11V |
| Min Supply Voltage | 2.5V |
| Output Current | 40mA |
| Propagation Delay | 12 μs |
| Quiescent Current | 6.5μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Dual Supply Voltage | 5.5V |
| Min Dual Supply Voltage | 1.25V |
| Current - Quiescent (Max) | 6.5μA |
| Voltage - Input Offset (Max) | 10mV @ 2.5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| Propagation Delay (Max) | 12μs |
| RoHS Status | RoHS Compliant |
TSM934ESE+T Overview
The product is packaged in 16-SOIC (0.154, 3.90mm Width) to facilitate transportation.This comparator is of the CMOS, Push-Pull, TTL output type.We ship the part through Cut Tape (CT) .It's a typical with Voltage Reference comparator.There are a total of 4 elements in it.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 16 pins.The comparator presents a quiescent current of 6.5μA volts.The PCB or other board has a Surface Mount for mounting.There is no need to exceed 85°C in terms of temperature.Lower temperatures than -40°C are unsuitable for it.Compatibility is defined as 11V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 2.5V is allowed for this comparator.A comparator part from the TSM93x series is used in this part.
TSM934ESE+T Features
CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 6.5μA
TSM934ESE+T Applications
There are a lot of Touchstone Semiconductor TSM934ESE+T linear comparators applications.
- Hand-Held Electronics
- Pulse, Squarewave, and Time Delay Generators
- Factory automation & control
- Portable and Battery-Powered Systems
- Infotainment and Clusters
- Mobile Phones
- Set Top Boxes
- Metering Systems
- Limit Comparators
- Industrial