TSM9117ESA+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Strip |
| Published | 2015 |
| Series | TSM91x |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Base Part Number | TSM9117 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Output Current | 50mA |
| Propagation Delay | 40 μs |
| Quiescent Current | 1.3μA |
| Response Time | 40000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Propagation Delay (Max) | 40μs |
| Length | 5mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
TSM9117ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with an output type of Push-Pull is being used.The part will be shipped by Strip .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as with Voltage Reference .Electronic comparator consists of 1 elements in total.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 8 pins.You may wish to search TSM9117 for more solutions that address your specific needs.In this comparator, the quiescent current is 1.3μA .The board has a Surface Mount for mounting on a PCB or any other board.Comparator electronics is part of the TSM91x comparator series.
TSM9117ESA+ Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.3μA
TSM9117ESA+ Applications
There are a lot of Silicon Labs TSM9117ESA+ linear comparators applications.
- Ultra-Low Power Systems
- Mobile Communications
- Battery-Powered Electronics
- Infotainment and Clusters
- Wireless Base Stations
- Portable Battery Monitoring
- Alarm and Monitoring Circuits
- High-Speed Sampling Circuits
- Power management
- General-Purpose, Low-Voltage Applications