TS5A3359DCUR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 9.610488mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A3359 |
| Pin Count | 8 |
| Number of Outputs | 3 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 16nA |
| Max Supply Current | 50nA |
| Turn On Delay Time | 21 ns |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Turn-Off Delay Time | 10.5 ns |
| -3db Bandwidth | 75MHz |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 3:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 18pF 54pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SP3T |
| Switch Time (Ton, Toff) (Max) | 21ns, 10.5ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -64dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 900mOhm |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3359DCUR Overview
Shipping overseas is convenient with the electronic component packed in 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 3:1. Operation at a temperature around -40°C~85°C TA. In total, there have been 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A total of 8 pins are injected into the body of the electronic part. A SP3T switching circuit is used to build these analog multiplexers. Look for analog switch ic variants by searching with TS5A3359. This digital multiplexer has 900mOhm internal resistance. Datasheets for 8 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. 1.65V is the lowest voltage the electrical component should receive. 16nA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. When the digital multiplexer is charged above 50nA, damage can occur. A 100MHz-bandwidth can be used for data transfer. A Drain to Source resistance of 900mOhm is shown for this electronic part. 3 outputs are included in the analogue multiplexer.
TS5A3359DCUR Features
1 Channels
Switch Circuit: SP3T
16nA Supply Current
-3db Bandwidth: 75MHz
Bandwidth: 100MHz
Drain-to-Source resistance: 900mOhm
TS5A3359DCUR Applications
There are a lot of Texas Instruments TS5A3359DCUR Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Cellular phones
- Microprocessor controlled systems
- Central office
- Relay replacements
- Precision data acquisition
- Precision instrumentation
- Intelligent PBX
- Medical Instrumentation
- Cross Connects