TS5A3167DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Supplier Device Package | SC-70-5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 900mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | TS5A3167 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Max Supply Current | 100nA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 7 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 7.5ns, 11ns |
| Charge Injection | 6pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 900mOhm |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3167DCKR Overview
The electrical component comes in 5-TSSOP, SC-70-5, SOT-353 packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. High-quality output is provided by the electronic component's 1 channels. These analog multiplexers are built based on SPST - NC switching circuits. A total of 1 circuits make up this switch device. Try searching with TS5A3167 to find analog multiplexer variants. It has an internal resistance of 900mOhm. Datasheets for functions of 5 pins are available. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. 10nA current would be enough for this multiplexer to operate. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. It may damage the digital multiplexer if the voltage is higher than 100nA. The electrical component supports 1 inputs. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. A temperature above 85°C is not suitable for operation of the analogue multiplexer. Resistivity from Drain to Source is 900mOhm for this electronic part. A analog switch ics with 1 outputs is included. It is offered by suppliers in package SC-70-5. Its conductivity is 1-bit.
TS5A3167DCKR Features
1 Channels
Switch Circuit: SPST - NC
10nA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 200MHz
Drain-to-Source resistance: 900mOhm
1-Bit
TS5A3167DCKR Applications
There are a lot of Texas Instruments TS5A3167DCKR Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- FTTH
- Residential Gateways, Home Gateway/Router
- Frame Relay Equipment
- Audio and video switching
- Transmit
- ATM
- T1/E1 Terminals
- Intelligent PBX
- Remote wireless modules