TS5A3166DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A3166 |
| Pin Count | 5 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 10nA |
| Nominal Supply Current | 10nA |
| Max Supply Current | 100nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 7 ns |
| Input Voltage (Max) | 7V |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 7ns, 11.5ns |
| Charge Injection | 1pC |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 900mOhm |
| Normal Position | NO |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 700mOhm |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3166DBVR Overview
The electronic part can be shipped overseas conveniently because it is packaged in SC-74A, SOT-753. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 5. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. As part of its design, the 5 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching with TS5A3166 if you're looking for variants. The internal resistance of this digital multiplexer is 900mOhm. To find out what the functions of 5 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended to use 1.65V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 10nA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. This switch operates within the bandwidth of 200MHz. There is 900mOhm resistance between Drain and Source for this electronic part.
TS5A3166DBVR Features
1 Channels
Switch Circuit: SPST - NO
10nA Supply Current
Bandwidth: 200MHz
Drain-to-Source resistance: 900mOhm
TS5A3166DBVR Applications
There are a lot of Texas Instruments TS5A3166DBVR Analog Switches & Multiplexers ICs applications.
- Isolation
- Cell phones
- Avionics test equipment
- New designs requiring multiplexer functions
- Automatic test equipment
- Channel Banks
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery Powered Instruments
- E1 Multiplexer
- Precision data acquisition