TS5A22364DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 650mOhm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TS5A22364 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 200nA |
| Max Supply Current | 3.3μA |
| Turn On Delay Time | 80 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 18.3MHz |
| Turn-Off Delay Time | 70 ns |
| On-State Resistance (Max) | 740mOhm |
| High Level Output Current | 150mA |
| Low Level Output Current | 150mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 66 dB |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| On-state Resistance Match-Nom | 0.023Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 80ns, 70ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -78dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.3V~5.5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A22364DGSR Overview
Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. In total, there are 10 terminations. Due to its 1 channels, the electrical component produces high-quality output. With a 2.5V voltage supply, the electrical component should be turned on and run. 10 pins are injected to the electronic part body. Unlike digital switches, these are based on SPDT switching circuits. Use TS5A22364 to search for variants of the digital switches. This digital multiplexer has 650mOhm internal resistance. For functions related to 10 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analog switch ics with Single supply type are cost-effective. 2.3V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 200nA. Analogue multiplexers require a 2.3V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 3.3μA. Operating the 2 inputs requires 2 inputs. 18.3MHz bandwidths enable data to be transferred. A analog switch ics with 4 outputs is included.
TS5A22364DGSR Features
1 Channels
Switch Circuit: SPDT
200nA Supply Current
Bandwidth: 18.3MHz
TS5A22364DGSR Applications
There are a lot of Texas Instruments TS5A22364DGSR Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Wireless Local Loop
- SDH
- Ultrasound
- DSUs
- Intelligent PBX
- Multiplexers
- Audio/video switches
- Data switching
- Frame Relay Equipment