TS5A2053DCTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 7.5Ohm |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS5A2053 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 1μA |
| Turn On Delay Time | 6.8 ns |
| Input Voltage (Max) | 6.5V |
| Supply Type | Single |
| Bandwidth | 330MHz |
| Turn-Off Delay Time | 4.1 ns |
| On-State Resistance (Max) | 13.8Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Channel Capacitance (CS(off), CD(off)) | 6pF 9.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 6.8ns, 4.1ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -68dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 6.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1.3mm |
| Length | 2.95mm |
| Width | 2.8mm |
| Thickness | 1.29mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A2053DCTR Overview
Due to its 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Extended operating temperature around -40°C~85°C TA. In total, 8 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.8V voltage supply. An electrical component of this type can be found in the 8 series. The analog switch ics are built using SPDT switching circuits. There are 1 circuits in this multiplexer. Search with TS5A2053 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 7.5Ohm. Datasheets for 8 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analog switch ics with Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This digital switch can be operated with a current of 100nA. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. The analogue multiplexer may be damaged if voltage is greater than 1μA. In 330MHz-bandwidths, data can be transferred. An output of 2 is provided by the digital multiplexer.
TS5A2053DCTR Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 330MHz
TS5A2053DCTR Applications
There are a lot of Texas Instruments TS5A2053DCTR Analog Switches & Multiplexers ICs applications.
- Cable PC
- Industrial and process control systems
- HDTV
- Intelligent PBX
- Access Concentrators
- Ultrasound
- PDH Multiplexers
- Routers
- Power routing
- MP3 players