TS3A5223RSWR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Weight | 10.007382mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 430mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | TS3A5223 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 2μA |
| Turn On Delay Time | 70 ns |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 75 ns |
| On-State Resistance (Max) | 600mOhm |
| High Level Output Current | 500mA |
| Low Level Output Current | 500mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 50pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 70ns, 75ns |
| Charge Injection | 40pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -75dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~3.6V |
| Drain to Source Resistance | 1.2Ohm |
| Height | 550μm |
| Length | 1.8mm |
| Width | 1.4mm |
| Thickness | 450μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3A5223RSWR Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 10 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. A SPDT switching circuit is used for these analog switches. Using the TS3A5223 search parameter, you can discover variants of the switch. This digital multiplexer has 600mOhm internal resistance. For functions related to 10 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.65V should be applied to the electronic component. Using only a single voltage supply, this analog switch requires 1.65V~3.6V voltage. It may damage the digital multiplexer if the voltage is higher than 2μA. It can operate from 3V operating voltages. This switch operates within the bandwidth of 80MHz. Drain to Source resistance for this electronic component is 1.2Ohm. Multiplexer ics with 4 outputs are available.
TS3A5223RSWR Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 80MHz
Drain-to-Source resistance: 1.2Ohm
TS3A5223RSWR Applications
There are a lot of Texas Instruments TS3A5223RSWR Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Microprocessor controlled systems
- Private Branch Exchange (PBX)
- Optical Applications
- Multi-Line E1 Interface Cards
- High reliability control systems
- Remote Powered Equipment
- Avionics
- SDH
- Digital access cross connects