TS3A5018RGYR

TS3A5018RGYR

8ns, 6.5ns SPDT 10Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5018 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-TS3A5018RGYR
  • Package: 16-VFQFN Exposed Pad
  • Datasheet: -
  • Stock: 691
  • Description: 8ns, 6.5ns SPDT 10Ohm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A5018 16 Pins 100nA 2.5V 16-VFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 8 Weeks
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-VFQFN Exposed Pad
Number of Pins 16
Weight 37.194574mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 16
ECCN Code EAR99
Resistance 10Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Multiplexer or Switches
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Terminal Pitch 0.5mm
Base Part Number TS3A5018
Pin Count 16
Number of Outputs 8
Power Supplies 2.5/3.3V
Number of Channels 4
Max Supply Voltage 3.6V
Min Supply Voltage 2.3V
Operating Supply Current 2.5μA
Nominal Supply Current 2.5μA
Max Supply Current 7μA
Turn On Delay Time 8 ns
Supply Type Single
Bandwidth 300MHz
Turn-Off Delay Time 6.5 ns
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 48 dB
Current - Leakage (IS(off)) (Max) 100nA
Channel Capacitance (CS(off), CD(off)) 4.5pF 9pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 8ns, 6.5ns
Charge Injection 2pC
Channel-to-Channel Matching (ΔRon) 300m Ω
Crosstalk -48dB @ 10MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 10.5ns
Switch-off Time-Max 9ns
Voltage - Supply, Single (V+) 1.65V~3.6V
Drain to Source Resistance 10Ohm
Signal Current-Max 0.1A
Height 1mm
Length 4mm
Width 3.5mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TS3A5018RGYR Overview


This electronic part is conveniently packaged in 16-VFQFN Exposed Pad, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 4 channels. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. The analog switch ics are built using SPDT switching circuits. Look for analog switch ic variants by searching with TS3A5018. It has an internal resistance of 10Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 3.6V. Analog switch ics with Single supply type are cost-effective. 2.3V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 2.5μA current would suffice. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~3.6V. A digital multiplexer may suffer damage if voltage is applied above 7μA. 300MHz-bandwidths can be used to transfer data between multiplexers. There is 10Ohm resistance between the Drain and Source on this part. The analog switch ics has 8 outputs.

TS3A5018RGYR Features


4 Channels
Switch Circuit: SPDT
2.5μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 10Ohm

TS3A5018RGYR Applications


There are a lot of Texas Instruments TS3A5018RGYR Analog Switches & Multiplexers ICs applications.

  • High-Voltage
  • Cable PC
  • Mechanical reed relay replacement
  • Fiber to the Home
  • Audio and video switching
  • Communications systems
  • Audio and video routing
  • PBX interfaces
  • Battery Powered Instruments
  • Public switching systems

Write a review

Note: HTML is not translated!
    Bad           Good