TS3A4751PWR
| Parameters | |
|---|---|
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | TS3A4751 |
| Pin Count | 14 |
| Operating Supply Voltage | 3V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Max Supply Current | 75nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 14 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 125MHz |
| Turn-Off Delay Time | 9 ns |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 100mA |
| Low Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 61 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 20pF |
| On-state Resistance Match-Nom | 0.09Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 14ns, 9ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Drain to Source Resistance | 900mOhm |
| Normal Position | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
TS3A4751PWR Overview
As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 14 terminations. This electronic part offers high-quality output due to its 4 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. There are 14 pins injected into the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use TS3A4751 to search for variants of the digital switches. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. To find out what the functions of 14 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 1.6V. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. Putting voltage greater than 75nA on the multiplexer may cause damage. There is a voltage range of 3V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. There are various bandwidths available for data transfer. It has a Drain to Source resistance of 900mOhm ohms.
TS3A4751PWR Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 125MHz
Drain-to-Source resistance: 900mOhm
TS3A4751PWR Applications
There are a lot of Texas Instruments TS3A4751PWR Analog Switches & Multiplexers ICs applications.
- Communications systems
- Battery-powered systems
- MP3 players
- Channelized and Unchannelized DS3 applications
- Signal routing between systems
- Digital access cross connects
- Microwave transmission systems
- Medical systems
- 65 V DACs
- Microprocessor Controlled Analog Systems