TS3A4742DGKR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TS3A4742 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 75nA |
| Max Supply Current | 750nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 15 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 125MHz |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 61 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 23pF 20pF |
| On-state Resistance Match-Nom | 0.09Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 14ns, 9ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3A4742DGKR Overview
The electronic component is convenient to ship overseas because it is packed in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. By its 2 channels, the electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 8 series. These analog multiplexers are built based on SPST - NC switching circuits. Search with TS3A4742 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 900mOhm. To find out what the functions of 8 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 3.6V to a switch device. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 1.65V. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~3.6V. When the digital multiplexer is charged above 750nA, damage can occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 2 inputs to be operated. A 125MHz-bandwidth can be used for data transfer.
TS3A4742DGKR Features
2 Channels
Switch Circuit: SPST - NC
Bandwidth: 125MHz
TS3A4742DGKR Applications
There are a lot of Texas Instruments TS3A4742DGKR Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Automatic test equipment
- New designs requiring multiplexer functions
- PBXs
- Avionics
- Communication systems
- Avionics test equipment
- DSLAMs
- Medical
- Precision instrumentation