TS3702IDT
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS3702 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull |
| Number of Circuits | 2 |
| Nominal Supply Current | 40μA |
| Power Dissipation | 710mW |
| Output Current | 20mA |
| Max Supply Current | 20μA |
| Propagation Delay | 1.5 μs |
| Quiescent Current | 25μA |
| Turn On Delay Time | 1.5 μs |
| Response Time | 1.5 μs |
| Common Mode Rejection Ratio | 82 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±1.35V~8V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Input Current | 1pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 1pA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR |
| Natural Thermal Resistance | 175 °C/W |
| Current - Output (Typ) | 20mA |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS3702IDT Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Push-Pull output.This chip is designed with the Cut Tape (CT) package.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.The type of the chip can be classified as General Purpose .A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator consists of 8 pins.Try search TS3702 to get more pin-to-pin solutions for your special needs.A quiescent current of 25μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 40μA .Current supply exceeding 20μA could cause disfunction of the compartator.Input current to the device is limited to 1pA .
TS3702IDT Features
CMOS, Push-Pull output capability
General Purpose IC
Operates under -40°C~125°C
Quiescent Current: 25μA
TS3702IDT Applications
There are a lot of STMicroelectronics TS3702IDT linear comparators applications.
- Infotainment and Clusters
- High-Speed Differential Line Receiver
- Simple Analog-to-Digital Converters (ADCs)
- Window Comparators
- Limit Comparators
- Hand-Held Electronics
- Security Detection Systems
- Battery-Powered Electronics
- Current and voltage sensing
- Point of load regulators