TS334IDT
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 259.19969mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS334 |
| Pin Count | 14 |
| Output Type | Open Drain |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 26μA |
| Output Current | 93mA |
| Propagation Delay | 210 ns |
| Quiescent Current | 26μA |
| Supply Current-Max | 0.038mA |
| Response Time | 420 ns |
| Common Mode Rejection Ratio | 79 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Supply Voltage Limit-Max | 5.5V |
| Max Input Current | 40nA |
| Input Bias Current | 40nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04μA @ 5V |
| CMRR, PSRR (Typ) | 79dB CMRR |
| Natural Thermal Resistance | 105 °C/W |
| Current - Output (Typ) | 93mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS334IDT Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open Drain is being used.The part will be shipped by Tape & Reel (TR) .There are14 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 1.8V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.As a result, it contains 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions by searching TS334 .The comparator presents a quiescent current of 26μA volts.Electronic comparator has a Surface Mount for mounting on PCB or other boards.The device can be operated with 1.8/5V power supplies.You can input a maximum current of 40nA into this device.From the voltage formula, the voltage gain of the part is 100dB .This part can be supplied with a maimum current of 0.038mA .Comparator electronics is necessary to have an operating supply voltage of 3V for normal operation.
TS334IDT Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 26μA
Voltage Gain: 100dB
TS334IDT Applications
There are a lot of STMicroelectronics TS334IDT linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Building automation
- Window Comparators
- Notebooks and PDAs
- Infotainment & cluster
- Alarm and Monitoring Circuits
- Wireless Base Stations
- Hand-Held Electronics
- Power management
- Self-diagnostics